Water-logged Uavionix Tail Beacon

[Joes]

I get it, the trailing of the water concept was from a conversation with Uavionix tech support. My personal concept on this was to use the tubing with a tee at midway length and silicone applied where the wires come in to the tube. Place a tube on the tee with a down turn at the top. Hope this helps, wasn't happy to have to replace after 2 years. Joe

[mshac]

Originally Posted by Joes

I get it, the trailing of the water concept was from a conversation with Uavionix tech support. My personal concept on this was to use the tubing with a tee at midway length and silicone applied where the wires come in to the tube. Place a tube on the tee with a down turn at the top. Hope this helps, wasn't happy to have to replace after 2 years. Joe

That sounds like the best we can do for now! I like the thinking.

If we keep our rudder cap drains unclogged it will never be an issue.

[mshac]

I wanted everyone to know that they totally took care of me and sold me a brand new unit for .4 AMU! I'm sold on uAvionix!

[mshac]

Installed and configured, The whole process took less than 30 minutes!