![]() |
|
Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
I have used cowl flap motors available
|
#2
|
|||
|
|||
Hello mshac,
I'm still checking with Matt also, but how much do you want for a rear cowl flap motor? My aircraft is a 1966 337A if that makes a difference. Do the motors come with gear teeth? Karl |
#3
|
||||
|
||||
I have a C62-1 (Alt: C610501-0102) cowl flap motor in tagged, AR condition.
Bench-tested, working smoothly with no abnormal sounds. $1200 plus shipping. |
#4
|
|||
|
|||
After having the motor removed by my mechanic today, we discovered that the pin on the rotating arm had been sheared off. The arm has to be installed so that the limit switch can stop at the fulling open and closed position. It was not. So, we installed it again and found the correct position for the pin, now it stops at the fully open and closed position. @Mshrc, thank you for the help.
Karl |
![]() |
Thread Tools | |
Display Modes | Rate This Thread |
|
|