![]() |
|
Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
janitrol heaters
I hope I spelled that right. I don't have one. One tip from Owen Bell, for those who have Janitrol heaters, is to install a Hobbs meter on the heater. It's probably old news to those of you who have them, but apparently there are service requirements based on useage. If you have a hobbs for the heater, that useage is not tied to the airframe, but rather to the actual heater useage
|
![]() |
Thread Tools | |
Display Modes | Rate This Thread |
|
|