![]() |
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools |
Rating:
|
Display Modes |
|
#9
|
||||
|
||||
|
Richard,
Do you have have GAMMI injectors? If you do, how close in degrees are the EGT's during lean find mode? I have a JPI and run at peak when at 65% or less which is usually #5 or #6 cylinder on either engine. Not sure exactly but I think there is about 100 degrees difference in EGT's between hotest and coolest cylinder. guy.... |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|