|
mine was done by travelling NDT service out of AZO, at annual 2 years ago. Don't remember the name, I'll look it up tomorrow night. Your mech should know the name of a good local company. They do more than Skymasters, the procedure is spelled out in the AD. It straight forward, you just want it to pass, because a failure means replacing the wing.
It cost about $400.
Done at Marshall Aviation. The mech there, Eric Metzger, works on my plane and Gerry DeSantis's plane. Knows his stuff.
Last edited by WebMaster : 11-13-05 at 10:59 PM.
|
11-13-05, 10:57 PM
Threaded Mode