|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
JPI 960 engine monitor for P337G
Anyone installed the 960 in a P model? I'm finding the installation on the front engine is a real problem in keeping to a constant distance from the cylinder of 2 to 4 inches especially on the front engine right side. No. 5 exhaust is very short and the pipe clamps on the other two are right in the way. Wondering if anyone came up with a good fix. JPI has been no help with this. Thanks in advance.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
