Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Rating: Thread Rating: 841 votes, 4.99 average. Display Modes
  #1  
Unread 01-22-14, 06:01 PM
SkyMac's Avatar
SkyMac SkyMac is offline
Registered User
 
Join Date: Sep 2010
Location: Australia
Posts: 146
SkyMac is on a distinguished road
Hi Guys

Don & Herb, many thanks for the quick responses to my dilemma. Based on your feedback Don we have now completed all SID's with the exception of the front and rear spar screw holes. Given mine are rivets and the current SID does not detail any information regarding aircraft with rivets.

We also took the opportunity to do further eddy current work on boom attachments to the wings and tail attachment regardless of the visual inspections. As mentioned all but one SID have been completed, so what am I going to do about what we decided not to do?

I have asked the person we used for the eddy current work to look at ways to complete an inspection in this area using other means, one that we can suggest to Mr Cessna for those aircraft that have rivets not screws. I am not saying we will find the answer, but I want to see what some very experienced and knowledgable people in non destructive testing and inspections can come up with.

This Friday I will discuss the way forward on this task with my engineers and the NDI team, the cost associated to complete the proposal and the next steps once we feel there is a workable solution.

My aircraft is a 74G normally aspirated SN 1575, we'll below the SN number Don mentioned.

I will keep you informed.

Dave
Reply With Quote
  #2  
Unread 04-06-14, 10:50 PM
hharney's Avatar
hharney hharney is offline
Forum Administrator
 
Join Date: Jul 2002
Location: Michigan (8D4)
Posts: 2,255
hharney is on a distinguished road
http://www.337skymaster.com/messages...ead.php?t=3599
__________________
Herb R Harney
1968 337C

Flying the same Skymaster for 47 years
Reply With Quote
  #3  
Unread 06-19-15, 09:33 AM
hharney's Avatar
hharney hharney is offline
Forum Administrator
 
Join Date: Jul 2002
Location: Michigan (8D4)
Posts: 2,255
hharney is on a distinguished road
Cessna - Friend or Foe?

After reading this article about the Cessna Centurion, it brings back some unsettled memories of sitting around a table with Skymaster advocates, Cessna Engineers and management several years ago in Wichita. Cessna does not want aging aircraft in the sky. Even though they have been given a congressional write off of all these older airplanes they are still trying to control the fleet. I am glad to hear the results of this situation and my hat is off to those that partnered with Mike Busch to challenge this attempt to control the pilots and owners. There is always two sides of the story but our side is being beat down by a heavy hand.....be careful out there


http://blog.aopa.org/opinionleaders/...T.mc_sect=blog
__________________
Herb R Harney
1968 337C

Flying the same Skymaster for 47 years
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 11:22 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.