#1
|
|||
|
|||
WTB: armrests
Hello:
I would like to get the armrests for the seats for my B model. If anyone has any I would love to hear from you. Thank you. Dave |
#2
|
||||
|
||||
Dave
Are you referring to the center pilot/copilot seats? They are rare, seen one guy just build some. If you need photos for build let me know
__________________
Herb R Harney 1968 337C Flying the same Skymaster for 47 years |
#3
|
|||
|
|||
Hi Herb, Those are the ones. Even if I had just one to use for a pattern would be great to find.
Dave |
#4
|
||||
|
||||
WTB: armrests
Dr. Dave.
I bought two armrests on E-Bay it was under "Cessna parts" category and not specific to Skymaster. They both had the approximate 1"X 1/4" piece, on the bottom of the arm, that goes into a fixture bolted on the seat, just like the diagram that Herb attached. I think I paid $50 for the two. One of them had to be re-bent as it was probably for the left side but the other armrest I bought was already for the left seat. I re-upholstered them with new foam and black leather. Hope this helps. BILLS |
#5
|
|||
|
|||
That does help. I will check ebay today.
Dave |
#6
|
||||
|
||||
Dave
Do you already have the brackets on the seats?
__________________
Herb R Harney 1968 337C Flying the same Skymaster for 47 years |
#7
|
|||
|
|||
Yes I do. They are installed on the front two and middle two seats. It's not too late for a Christmas present from you. Ha.
Dave |
#8
|
||||
|
||||
Quote:
I took some photos today and will post them on the site but have more if you want me to send them direct. Also have the armrest with me if you want some measurements
__________________
Herb R Harney 1968 337C Flying the same Skymaster for 47 years Last edited by hharney : 01-02-18 at 06:52 PM. |
#9
|
|||
|
|||
Herb:
That is exactly what I needed. All I need to do not is get four of those fabricated. I'll probable need some measurements at some point. Thank you. Dave |