|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
Thread Tools | Rate Thread | Display Modes |
#1
|
||||
|
||||
Cowl flap motor rebuilder
This chap mentioned w great reviews on facebook page for 337s
Thought I would cut n paste for others FYI "Jerry D. Brown -I just had my rear cowl flap motor rebuilt by Matt Elder, MaxQ Composites, 1-207-408-4965. Cowl flaps operate great now" Matt Elder, MaxQ Composites, 1-207-408-4965
__________________
David Wartofsky Potomac Airfield 10300 Glen Way Fort Washington, MD 20744 |
#2
|
||||
|
||||
Matt is a GREAT guy! Really helped me out and is working on an alternate motor system. In fact, I have been in touch with him last week as I am having intermittent issues. If it trouble shoots to the motor, off to him it goes. Treated me really well on the front motor.
|
#3
|
|||
|
|||
Front Cowl Motor
Matt just rebuilt a front cowl motor for me, works great and very reasonable. Thanks to this website for all the useful information it provides. Joe
|
#4
|
|||
|
|||
Cost
What sort of cost was involved in front/rear cowl flap motors?
|
#5
|
|||
|
|||
Front Cowl Motor
The gear on the rotor shaft was slipping (I ended up breaking the gear, my bad) the gear was replaced along with a serviceable planetary gear set (some components were missing from the unit) at a cost of 350.00 + shipping.
|
#6
|
|||
|
|||
Cost
Thanks for sharing
|