![]() |
|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
![]() |
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
That would be great, I will try to do my best in replicating the part.
Just to be clear, I would like to start with 1515021-1, the lens with the "wings" at the end. There is another version of the light dome that is flat all the way. I would later work on that one if I can also get a hold of one too. All I will do is take reference pictures and measurements from the borrowed part, nothing more. Once I get a good model and test print that is satisfactory, I will promptly return the part. It should take no more than a week. I included the two version images. Last edited by ljmolina : 08-25-22 at 05:16 PM. |
#2
|
||||
|
||||
I don't need one, but I'm pulling for you guys. I love it when a plan comes together.
![]() Just watch: https://www.youtube.com/watch?v=RZoIunC1Yk8 Last edited by mshac : 08-25-22 at 10:17 PM. |
#3
|
||||
|
||||
Same here! I'd put one in my parts stock if another were available.
|
#4
|
|||
|
|||
I have a brand new version 2--the flat one. That is also the one I have installed in my plane. I don't have the one with the "wings" on the end.
The ends of the flat one are different--both have a curved piece but they are of different sizes and different radii. My plane is a normally aspirated 77G Kevin |
#5
|
||||
|
||||
Quote:
|