Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 01-03-23, 11:42 PM
YankeeClipper's Avatar
YankeeClipper YankeeClipper is offline
Registered User
 
Join Date: Apr 2013
Location: CT
Posts: 262
YankeeClipper is on a distinguished road
Arc Navomatic components

Are the servos used with a 400 the same as those for a 400A or 400B? The later control units come up often on ebay, and I see there are still a few repair facilities out there that will refresh them. So I'm wondering if it would be feasible and practical for me to upgrade from my 400 to the A or b. I'm not sure but I think I would also need to upgrade the computer or amplifier, but would there be anything else I would need to consider?
Reply With Quote
  #2  
Unread 01-04-23, 08:47 AM
Kim Geyer Kim Geyer is offline
Registered User
 
Join Date: May 2002
Location: Bahama, NC
Posts: 294
Kim Geyer is an unknown quantity at this point
When you find out let me know. I have 4 systems we changed out over the years that could be yours for the price of shipping and a hot dog lunch!
Reply With Quote
  #3  
Unread 01-04-23, 10:42 AM
YankeeClipper's Avatar
YankeeClipper YankeeClipper is offline
Registered User
 
Join Date: Apr 2013
Location: CT
Posts: 262
YankeeClipper is on a distinguished road
Quote:
Originally Posted by Kim Geyer View Post
When you find out let me know. I have 4 systems we changed out over the years that could be yours for the price of shipping and a hot dog lunch!
Well wait a minute there ... are we talking OMW or Nathan's?
Reply With Quote
  #4  
Unread 01-04-23, 01:08 PM
YankeeClipper's Avatar
YankeeClipper YankeeClipper is offline
Registered User
 
Join Date: Apr 2013
Location: CT
Posts: 262
YankeeClipper is on a distinguished road
Looks like I would need different servos and even wiring if I moved to the 400a.

Last edited by YankeeClipper : 01-04-23 at 03:10 PM. Reason: typo
Reply With Quote
  #5  
Unread 01-04-23, 04:16 PM
YankeeClipper's Avatar
YankeeClipper YankeeClipper is offline
Registered User
 
Join Date: Apr 2013
Location: CT
Posts: 262
YankeeClipper is on a distinguished road
Spoke with AP Central (in OK) earlier about changing the ARC to an A or B. Not only are the components separate, but it would be a field approval to convert as they were not offered in the Delta model (among others). Chances of success were described as "very low" even if I was up to the challenge.

Just spoke with Gulf Coast about giving in and exploring S-Tec. The prior models are no longer offered, and the ball park cost for a new 55x system all in is $43k. Sure wish I'd known the 30/40/50 systems were going offline sooner.

That leaves me squarely in the realm of fly-by-hand pilots--at least in IMC.

Congrats to S-Tec for pricing themselves out of an entire class of customers.

So where are we with that Garmin campaign?
Reply With Quote
  #6  
Unread 01-05-23, 12:56 AM
wslade2 wslade2 is offline
Registered User
 
Join Date: Feb 2016
Location: none
Posts: 303
wslade2 is on a distinguished road
Whaaa!
Guess I was asleep with life.
Wasn’t aware those autopilots were going out. Sure didn’t make the usual news routes. A check of their website confirms 30-40-50 autopilots gone. Really limits the options for alot of aircraft. Always had a below series 55x in mind as a backup plan…
Not anymore
Reply With Quote
  #7  
Unread 01-15-23, 11:55 AM
n86121's Avatar
n86121 n86121 is offline
bigcheese
 
Join Date: Nov 2003
Location: Potomac Airfield~!
Posts: 329
n86121 is on a distinguished road
https://www.portapilot.com/

https://www.portapilot.com/

Years ago, before GPS, we were on a friend's sailboat and it had this gadget looked like a shock absorber, . One end attached to the tiller and other the boat.

It would expand and contract to hold a basic constant heading.

This seems to be the GA version.

That all aside, the 337 is soooo table when trimmed......

Over the years I picked up servos and even Navomatic CPUs (and I use the term 'CPU' very loosely), to have enough bits and pieces. It's basically a collection of analog feedback 'chopper' circuits that ue pos/neg pulses to pass analog signals.

Eventually the CPU capacitors got snarky in the CPU so I pulled the whole thing and sent off to autopilots central for OH recert on their bench.
__________________
David Wartofsky
Potomac Airfield
10300 Glen Way
Fort Washington, MD 20744
Reply With Quote
  #8  
Unread 01-30-23, 02:29 PM
cessnadriver's Avatar
cessnadriver cessnadriver is offline
Registered User
 
Join Date: May 2010
Location: Kempner, TX
Posts: 359
cessnadriver is on a distinguished road
Smile Arc Navomatic components

YankeeClipper.
I just spent about a year getting my 1965 straight 400 auto pilot operational. The avionics shop I used is Mayday in Grand Rapids Michigan, I had originally wanted to use Auto pilot Central, in Oklahoma. They told me they where no longer working on 400 auto pilots. Mayday rebuilt the computer, and bench checked the servos, and the control head, they told me the servos, computer, and control heads ARE ALL DIFFERENT PART NUMBERS EACH MANUFACTURE YEARS, AND YOU CANNOT UP GRADE 400 TO A 400A OR 400B! I had bad servos. I was very lucky to find a caring SOAPA member who had replaced his 400 to something newer and GAVE me his 400-FREE, I paid the shipping. By chance his servos were the correct part numbers and where in good condition which I used. All in I have about $10000 in, parts, maintenance, Avfuel traveling two times to Michigan, hotels, car rentals, to get my 400 auto pilot up and running. I figured that's much better than spending $30-40000 for a newer auto pilot, for an airplane I bought for $22,500!!
Hope this helps.
Regards, BILLS
'65 C337, Owner, pilot, and A&P

Last edited by cessnadriver : 01-30-23 at 02:46 PM.
Reply With Quote
  #9  
Unread 01-30-23, 07:07 PM
mshac's Avatar
mshac mshac is offline
Registered User
 
Join Date: Aug 2020
Location: North Texas
Posts: 763
mshac is on a distinguished road
Quote:
Originally Posted by cessnadriver View Post
YankeeClipper.
All in I have about $10000 in, parts, maintenance, Avfuel traveling two times to Michigan, hotels, car rentals, to get my 400 auto pilot up and running. I figured that's much better than spending $30-40000 for a newer auto pilot, for an airplane I bought for $22,500!!
Hope this helps.
Regards, BILLS
'65 C337, Owner, pilot, and A&P
I'll give you $32,500 for it!
Reply With Quote
  #10  
Unread 01-31-23, 08:56 AM
cessnadriver's Avatar
cessnadriver cessnadriver is offline
Registered User
 
Join Date: May 2010
Location: Kempner, TX
Posts: 359
cessnadriver is on a distinguished road
Smile Arc Navomatic components

MSHAC
Well thanks, but that price wouldn't quite do it. Even with high time engines, although I'm installing an overhauled rear engine and new cylinders for the front I've got too much other improvements, ie new three color paint job, rear door removal kit, Garmin G5 AI and of course the overhauled 400 auto pilot. But thanks anyways !
Regards, BILLS

Last edited by cessnadriver : 01-31-23 at 09:08 AM.
Reply With Quote
  #11  
Unread 01-31-23, 11:56 AM
mshac's Avatar
mshac mshac is offline
Registered User
 
Join Date: Aug 2020
Location: North Texas
Posts: 763
mshac is on a distinguished road
Hey Bill, how did you manage to get that big avatar photo of your plane uploaded to your profile? This site limits our avatars to 150 x 150 pixels, but yours is much larger and looks better. I WANT ONE TOO!
Reply With Quote
  #12  
Unread 01-31-23, 09:03 PM
cessnadriver's Avatar
cessnadriver cessnadriver is offline
Registered User
 
Join Date: May 2010
Location: Kempner, TX
Posts: 359
cessnadriver is on a distinguished road
Question aircraft picture on web page?

MSHAC
Hey I don't really know!! I went back and forth in my personal profile reduced my pics several times and I too got the limited size quote. All I know is I edited the avatar, I think that's what it's call, and edited the picture. The next thing I know I see the oversized picture??? Sorry I'm not a computer geek.
Regards, and good luck.
BILLS
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 07:17 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.