#1
|
|||
|
|||
Gear Up landing
Today I witnessed a forgot to put the gear down moment on a 182RG. The owner decided to lift the plane with a excavator and 4 in wide lifting straps. The operation was successful in getting the plane on the gear, but damaged the tail section. How is the best way to get a skymaster back up and on its gear or a dolly without destroying the airframe? Lift by attaching at each engine d-ring bracket and use a spreader bar. A comment on any thoughts or experience would be helpful. I hope this never happens to anyone, but it would be nice to have a backup plan. Thanks, Joe S
|
#2
|
||||
|
||||
Wing Jacks if it's on hard surface
__________________
Herb R Harney 1968 337C Flying the same Skymaster for 47 years Last edited by hharney : 02-13-24 at 08:51 PM. |