|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Cessna 400 autopilot
I did buy a P337G today, got a great deal from a friend of mine.
3500 TT, 400SMOH front and back. Last year the Cessna A/P stopped working he told me, completely failed. On the ground after switching the on/off switch the power light on the top right did not illuminate, assuming that what it is. I checked the fuse panel, and did not see an autopilot breaker. Its a 400 series, and it seems factory. No manuals either, but did download the manuals from scudrunner. They do not seem to match what I have in my 337. Suggestions ? Thanks all. Henri. |
#2
|
||||
|
||||
If you can't tell which 400 version, post a pic. I'm guessing a 400A given the G model, but maybe a B. Either way, it ain't likely a straight 400 (like mine) and is, according to ample research, worth revitalizing in a lot of cases. We have few and poor choices for aftermarket for our airplanes, and a 400A or B will be a very steady position-based AP. You can still get them repaired too--virtually impossible with the straight 400.
|
#3
|
|||
|
|||
Hi I am looking for any advice on wing and tail boom brackets that hold the servos
Any ideas |
#4
|
||||
|
||||
Do you have part numbers? Check with Don Nieser at Commodore Aero
__________________
Herb R Harney 1968 337C Flying the same Skymaster for 47 years |
#5
|
|||
|
|||
Thanks spoke to Don he did one years ago but has nothing can not find part number anywhere
|
#6
|
||||
|
||||
Quote:
Have you posted on the Facebook Skymaster pages? https://www.facebook.com/groups/28721444559
__________________
Herb R Harney 1968 337C Flying the same Skymaster for 47 years |
#7
|
|||
|
|||
I’m cleaning out our hangar now. I have several 400 autopilot systems. Some of servos still have the mounts with them. I may have what you need. Email me: geyer@wefly4u.com
Last edited by Kim Geyer : 03-08-24 at 06:58 PM. |
#8
|
|||
|
|||
Quote:
|
#9
|
||||
|
||||
Quote:
-LJ |