Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 09-27-03, 11:27 PM
amichelin amichelin is offline
Member
 
Join Date: Nov 2002
Location: HHR
Posts: 36
amichelin is an unknown quantity at this point
Question new panel

Hi
I am planning a new panel in my 1973 337P. I have some equipment that I purchaed used and some i want to buy new. My contact with the "established " shops did not go over very well as they are not happy that i am bringing my own equipment.

I am in Southern California, but will fly 11 western states for a good deal.

I am thinking about getting one of thoes special made pre-wired harness, if anyone has any history with a pre wired harness please let me know.

FYI. I am putting in a kmd 150 with gps and a KLN 90B. 2 KX 155's , and a KMD 24.

All very reaonsably priced.

Comments please!

Adam
Reply With Quote
  #2  
Unread 09-28-03, 06:04 AM
Rickskymaster Rickskymaster is offline
Member
 
Join Date: Jul 2002
Location: Gaithersberg, Maryland
Posts: 117
Rickskymaster is an unknown quantity at this point
Installation shops

I lived in LA for 20 years, but it was 10 years ago.
At that time Vista Aviation at Whitman and Jim's Avionics at Van Nuys would install without purchasing equipment.
Since I have not been there for a while, it could have changed.
My old mechanic is located on Torrance and if anyone would know, it would be this guy. Let me know how things turn out.
By the way, I am going to be in LA this coming weekend. Taking Jet Blue at $119 each way, cannot meet the deal.

Rick
Reply With Quote
  #3  
Unread 09-29-03, 12:51 AM
amichelin amichelin is offline
Member
 
Join Date: Nov 2002
Location: HHR
Posts: 36
amichelin is an unknown quantity at this point
jet blue

thanks for the tip. I am asking Vista if they will do it. I will call the other guy in vny.
Reply With Quote
  #4  
Unread 10-25-03, 04:36 PM
jimmuse jimmuse is offline
Registered User
 
Join Date: Apr 2002
Location: Huntington Beach, CA
Posts: 72
jimmuse is an unknown quantity at this point
Send a message via Yahoo to jimmuse
Hi,.

You might check with Dick Dale (shoot him an email at dick@dickdale.com).

He was very happy with his avionics guy in Ramona.

And where in SoCal? I am at SNA with 3 other Skymasters... actually 4.

Jim
Reply With Quote
  #5  
Unread 10-25-03, 07:47 PM
amichelin amichelin is offline
Member
 
Join Date: Nov 2002
Location: HHR
Posts: 36
amichelin is an unknown quantity at this point
Hi Jim

I am at HHR although I fly into sna frequently. I have selected Vista out of Whiteman, i know a few that have had their panel done at Vista and were very happy.

I have a very very bad experience at Boward at Ramona. I am looking for a mechanic that knows 337's. Any help their?

Adam - N79C
Reply With Quote
  #6  
Unread 10-26-03, 10:26 AM
jimmuse jimmuse is offline
Registered User
 
Join Date: Apr 2002
Location: Huntington Beach, CA
Posts: 72
jimmuse is an unknown quantity at this point
Send a message via Yahoo to jimmuse
Jay's Aircraft Maintenance at SNA. They work on 4 currently and know them well.
Reply With Quote
  #7  
Unread 10-26-03, 12:06 PM
amichelin amichelin is offline
Member
 
Join Date: Nov 2002
Location: HHR
Posts: 36
amichelin is an unknown quantity at this point
annual

Hi Jim

Thanks i will sto by and vist the next time i am at sna.
Adam
Reply With Quote
  #8  
Unread 12-28-04, 10:44 PM
Robert Robert is offline
Member
 
Join Date: Aug 2004
Location: San Diego
Posts: 7
Robert is an unknown quantity at this point
337 Mechanic in San Diego

Hi Adam, Robert here. We keep our 66 337 at SEE (Gillispie) near San Diego. My 337 Parter, John, is an A & P with an IA designation and he also is a CFII. He maintains our 337 along with a friend's beautiful 77. Having spent hundreds of hours working alongside John to restore our 337 from 97 to 99, I can state, without reservation, that he is an outstanding mechanic. His cell is 619-922-1537. If you call, be ready to talk because John love's to yak about airplanes. He truely is a walking aviation encyclopedia.
Reply With Quote
  #9  
Unread 12-29-04, 07:35 AM
Rickskymaster Rickskymaster is offline
Member
 
Join Date: Jul 2002
Location: Gaithersberg, Maryland
Posts: 117
Rickskymaster is an unknown quantity at this point
Vacationing over xmas in Southern Cal

My family and I are staying in Anaheim Hills, if any of the guys who keep their planes at SNA have time, I would enjoy coming over and visiting, we leave on Sunday,
I have a 76 Normal and have had it for 3 years.
My cell is 410-916-0039

Thanks

Rick
Reply With Quote
  #10  
Unread 12-29-04, 08:35 AM
Dale Campbell's Avatar
Dale Campbell Dale Campbell is offline
Owner 337H N337DC
 
Join Date: Apr 2002
Location: Scranton, Pa.
Posts: 276
Dale Campbell is an unknown quantity at this point
337 Panel

Hi Amichelin,
Iam on the East Coast and use O & N for all 337 repairs and panel work. I have basicly the same instrument you are installing.
I put in the KMD150 King in 3 years ago and love it. Large screen and very easy to operate. I will include a photo of panel if you need ideas of layout. Dale Campbell
Attached Images
File Type: jpg 337dc panel.jpg (306.9 KB, 2268 views)
Reply With Quote
  #11  
Unread 12-29-04, 04:19 PM
Richard Richard is offline
Registered User
 
Join Date: May 2002
Location: Pacific NW
Posts: 210
Richard is an unknown quantity at this point
Nice Nice panel. Just curious. What is your empty wieght of your plane?
Reply With Quote
  #12  
Unread 12-29-04, 07:50 PM
amichelin amichelin is offline
Member
 
Join Date: Nov 2002
Location: HHR
Posts: 36
amichelin is an unknown quantity at this point
Re: 337 Mechanic in San Diego

Hi Robert

I will call him up and chat. I will tell you that Jay at Jays Aircraft in SNA has been a real life saver for me. His team is just tops.

Adam
Reply With Quote
  #13  
Unread 12-29-04, 07:59 PM
amichelin amichelin is offline
Member
 
Join Date: Nov 2002
Location: HHR
Posts: 36
amichelin is an unknown quantity at this point
Re: Vacationing over xmas in Southern Cal

Hi Rick

Sorry I just returned from vacation. You are welcome to call Jay (714-433-2275) and visit my plane (new engine and interior). I will not be able to meet you, after 2 weeks vacation I am just crazy at work.

Adam
Reply With Quote
  #14  
Unread 12-29-04, 08:01 PM
amichelin amichelin is offline
Member
 
Join Date: Nov 2002
Location: HHR
Posts: 36
amichelin is an unknown quantity at this point
Re: 337 Panel

Hi Dale

Great panel. I will send you a picture in a few days. The only diference between your panel and mine is I have a IFR rated 89B that feeds the 150. I just love the 150 bright, very clear and very very readable.
Adam
Reply With Quote
  #15  
Unread 12-31-04, 09:20 AM
Dale Campbell's Avatar
Dale Campbell Dale Campbell is offline
Owner 337H N337DC
 
Join Date: Apr 2002
Location: Scranton, Pa.
Posts: 276
Dale Campbell is an unknown quantity at this point
Useful Load

Hi Amichelin,
To answer you question, on useful weight. In 2000 when I had the plane refurbed. I had large main gear doors removed and related actuator and plumbing. All new lighter interior installed. Some old instrument replaced with newer lighter instruments. And I removed the 5th and 6th seat and seat belts, I gained a little more useful load. I had the new weight and balance done. The useful load is about 1637 lbs. I also got the weight and balance done with the 5th and 6th seat back in, just in case I put them back. In the past 4 years they have never been back in. I like the larger cargo area. I have the 155 gallon fuel tanks which I keep full for most flights. I found a field with cheap fuel prices ranging from $1.98 to $2.30 average price over the last 4 years.
It is 60 miles from my home base. That is why I keep tanks full and to keep out moisture. I know I am with-in proper weight and balance and do not have to cut down fuel unless I plan a 4 person flight. Any other questions, I would be happy to answer.
I love my 337H. Dale
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 07:36 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.