Pitot heater element - Page 3

patrolpilot · #31 12-24-20, 11:45 AM

Dan, what is the price of your kit?

Dan schultz · #32 12-24-20, 01:49 PM

300.00

Dan

patrolpilot · #33 12-25-20, 10:19 AM

Dan, I really appreciate your work on this project.

patrolpilot · #34 12-25-20, 10:31 AM

Quote:

Originally Posted by Dan schultz

I have ran the heater for 3.5 hours continuously last week in the hangar without any problems. I will have 3 units that should be able to ship by the end of the month. The unit in the circuit with the thermostat pulls 2.3 amps.

As a note, you did well with the amp draw! For those of you without the Maintenance Manual, I have the '74 through '80; my '77 G is 4.3 amps! '74 through '76 is 2.2 (close enough), the '78 is 2.9, and the '79 & '80 is back to 2.2. Well done, Dan!

Dan schultz · #35 12-28-20, 02:17 PM

For those interested, I also will have new thermostat's available. 39 plus shipping.

Dan

edasmus · #36 05-01-22, 07:23 PM

Hi Dan,

I own a 1973 C337G Sky Master, N1873M s/n 33701473. My pitot heat recently has ceased to function. Do you still sell your pitot heat kit as well as the thermostat/heat sensor? If so, what is your current price for all and how do I order? I also sent you an email at the address you posted.

I will see my IA mechanic tomorrow to discuss installing your kit if you have availability.

Sincerely,

Ed Asmus
Sugar Grove, IL

Dan schultz · #37 05-01-22, 07:58 PM

Hi Ed, yes for the prices listed.

Dan
N67S
937-603-2459

edasmus · #38 05-01-22, 08:03 PM

Thank you Dan. I'll be in touch tomorrow after discussing with my IA.

Thank you,

Ed

Dr.Dan · #39 05-02-22, 10:11 AM

For those interested, this kit works very well. Get the thermostat at the same time.

dd

n86121 · #40 05-07-22, 01:37 PM

I know I had mine replaced years ago, and it was under $300 new.
My my, how time flies....

Just curious: Would these work on older 337's, albeit used?

Dan schultz · #41 05-07-22, 03:50 PM

The flexible heater is universal for pressurized and no pressurized aircraft. Two different sets of holes.

Dan

n86121 · #42 05-07-22, 04:20 PM

Updating databases, a mech left the pitot heat on, w pitot cover.
Roasted the cover nicely.
Confirmed functioning …for now.

So is the problem the stainless pitot housing, or some thermostat in between?

Dan schultz · #43 05-07-22, 08:57 PM

The kit is for the pitot inside the left strut cover, not for the regular style pitot.

Dan

YankeeClipper · #44 05-08-22, 08:34 PM

I'm still a bit green about some of these things; does this mean it isn't the right kit for my (seemingly) stock, N/A '69 D?

edasmus · #45 05-12-22, 09:27 AM

I received my kit from Dan. All is as advertised and well organized. My shop liked what they saw. The kit will now sit on my shelf until August when my airplane goes in for it's annual inspection. It will be installed then and I will report back then on our anticipated success.

Thanks again Dan....