Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Unread 10-21-08, 08:53 PM
cessna02337's Avatar
cessna02337 cessna02337 is offline
Registered User
 
Join Date: Nov 2007
Location: NE
Posts: 20
cessna02337 is an unknown quantity at this point
Split in Manifold Pressure.....Need Help

Well.....went to take the aircraft (1967 O-2A) for a 25 Hour Oil Change, noticed while taxing over at normal idle I had a manifold split (Front engine reading 16, Rear 14). Briefed mechanic, during oil change he found a small crack on front engine manifold, left side. Removed and replaced along with the correct gasket. Taxing out, for maintenance run, same issue, no change, still had the split.

I performed various engined runs at different power setting and it seemed to follow at all ranges (about 2 inch split, front engine always being higher). I have a Shadin fuel / air data computer and fuel flow to RPM seems to be within .08 per engine fuel flow in gallons per hour. when RPM matched.

Looked at a video I shot last flight to confirm previous matching of manifold pressure and noticed my Manifold pressure as I remembered were always EXACTLY matched to include during taxi/ground ops as well flight.......any info regarding next steps, haven't flown it yet, planning on a test flight Thursday.

From what I was told, this is within the maintenance limits, just don't like the split as I have never seen before.

Thanks as always in advance, T.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 06:06 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.