Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #7  
Unread 10-14-17, 07:15 AM
LostKiwi's Avatar
LostKiwi LostKiwi is offline
Registered User
 
Join Date: Jan 2016
Location: Canada, eh.
Posts: 56
LostKiwi is on a distinguished road
I'm big on "the diet" as well. Over the years my plane had a few different radios, ADF's and whatnot installed in it.

Its pretty common for shops to run new wiring and just cap the old stuff, rather than spend the time to remove the old wiring. I've done half of my insti panel, gutted as much of the old stuff as possible. Removed old ADF systems, DME and other stuff that can be replaced with modern gear, and literally a box full of wiring.

My (calculated) change was about 21 lbs.

If you really wanted to save weight, the obvious solution would be to ditch the vacuum system, and go to a DC and/or Glass install. Then 3 bladed props. Then... then... then...




There is no problem that cannot be solved with the correct application of money.

Leighton
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 02:08 AM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.