Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Rating: Thread Rating: 2 votes, 5.00 average. Display Modes
  #1  
Unread 07-09-08, 11:08 PM
JeffAxel JeffAxel is offline
Registered User
 
Join Date: Mar 2007
Location: Portland, Oregon
Posts: 150
JeffAxel is an unknown quantity at this point
Thumbs up

Herb,
my Skymaster ( a '77 T337G) had BAS seat belts in it when I got it. They are wonderful. No problems moving around, and I am sure they would be much better in a crash than the factory 3 point seat belts my 210 had. There is only one buckle, just like the stock seat belts, so no additional hassles getting them off. They are approved for Skymasters under
STC SA2067NM. I would recommend them.
Reply With Quote
  #2  
Unread 07-12-08, 05:28 PM
billsheila billsheila is offline
Registered User
 
Join Date: Oct 2006
Location: MA
Posts: 82
billsheila is an unknown quantity at this point
Seat Belts Help

Hi Herb;
I went digging into the paperwork I have for N2131X and it appears that the 3 point belts installed in my bird were sold by a company called "Aircraft Belts, Inc." out of Kemah, Texas. The phone number I have is 713-538-1284 but this is off of a invoice from 1995 so who knows if still valid. I didn't try googling them but that might be a way to check on them.

Hope that helps.
Bill
Reply With Quote
  #3  
Unread 07-13-08, 03:11 PM
skymstr02's Avatar
skymstr02 skymstr02 is offline
Ace of the Atmosphere
 
Join Date: Apr 2002
Location: Madison, MS
Posts: 329
skymstr02 is an unknown quantity at this point
Aircraft Belts only repairs exisiting units, they don't have STC's or installation data.
Reply With Quote
  #4  
Unread 07-20-08, 09:43 PM
hharney's Avatar
hharney hharney is offline
Forum Administrator
 
Join Date: Jul 2002
Location: Michigan (8D4)
Posts: 2,255
hharney is on a distinguished road
Question

Quote:
Originally Posted by JeffAxel View Post
BAS seat belts They are wonderful. No problems moving around, There is only one buckle, just like the stock seat belts, so no additional hassles getting them off. They are approved for Skymasters under
STC SA2067NM. I would recommend them.
Thanks for the reply Jeff, I really questioned if they would be comfortable or not. In the pictures I have seen they look very restrictive, like the upper belts are rubbing up against the neck. My concern with BAS over other 4 point systems is the single attachment point for the upper belts. This looks really uncomfortable.
Attached Thumbnails
Click image for larger version

Name:	harness_front.jpg
Views:	1158
Size:	16.1 KB
ID:	617  
__________________
Herb R Harney
1968 337C

Flying the same Skymaster for 47 years
Reply With Quote
  #5  
Unread 07-21-08, 12:17 AM
JeffAxel JeffAxel is offline
Registered User
 
Join Date: Mar 2007
Location: Portland, Oregon
Posts: 150
JeffAxel is an unknown quantity at this point
Thumbs up BAS belts

Well Herb, that has not been my experience. I thought the same as you, and wouldn't have done the installation either based on appearence. As I said, my plane came with them already installed, so I had to try them out and I have found them to be quite comfortable, no hanging on your neck at all. I feel they are a good upgrade, but as they say, YMMV! You might find a plane with them installed and try them out, who knows, you might like them! If you find yourself out this way, look me up, you can try mine.
Reply With Quote
  #6  
Unread 07-21-08, 08:57 AM
hharney's Avatar
hharney hharney is offline
Forum Administrator
 
Join Date: Jul 2002
Location: Michigan (8D4)
Posts: 2,255
hharney is on a distinguished road
Thanks Jeff, I will be in Twin Falls August 11th week. Will that be close enough? Meet you there! I would love to try them.
__________________
Herb R Harney
1968 337C

Flying the same Skymaster for 47 years
Reply With Quote
  #7  
Unread 07-21-08, 08:54 PM
JeffAxel JeffAxel is offline
Registered User
 
Join Date: Mar 2007
Location: Portland, Oregon
Posts: 150
JeffAxel is an unknown quantity at this point
you are a hopeful sort!! But if you can get to Portland, dinner is on me!
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 10:59 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.