|
|
|||||||
| Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
|
Thread Tools |
Rating: 
|
Display Modes |
|
#6
08-12-08, 02:38 PM
|
||||
|
||||
|
Robert, I am not sure if you know how to get the flap quadrants/bellcranks and cables out of the wings, if it would help I could take some photos and send them to you. With the flaps in the down position, the access panels in the flap wells need to be removed to gain access to the cables and quadrants/bellcranks. The quadrants/bellcranks are held in by a bolt that goes from the top of the wing to a nut on the bottom of the wing. The cables ends are attached to the quadrants/bellcranks. I would look for any evidence of rust "iron oxide"
on the cable wires. Don Nieser Commodore Aerospace Corp 405-503-4686 On Tue, 12 Aug 2008 11:37:25 -0400 (EDT) "Skymaster Forum" < 
|
Threaded Mode