|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
Jose
I agree with Bob once set up with corrections put into the unit should be very accurate other than it does not seem to read when engines idling below 1000rpm during taxi, my unit is repeatably accurate over many trips and it also helps me smooth out the engines during climb. 8000ft at 21" at 2350rpm front 39 lphr rear 41 lphr 9000ft at 20.5" at 2350rpm front 38 lphr rear 39 lphr 10000ft at 19.5" at 2350rpm front 37 lphr rear 38 lphr Depends a bit on temp / density, as I said very reliable would not be without it Regards ............. Wayne |