|
|
#14
12-30-23, 12:03 PM
|
|||
|
|||
|
Thank you, Joes. My G model has the larger main wheels, and the stopping power is certainly adequate. I was asking about the brake pressure as I was wanting to pressure test a swivel fitting. I put a pressure gauge inline at the left brake caliper and all I could get out of it was about 4-500 PSI. I took the swivel fitting to 1750 PSI and no leaks, so I think it should be good to go.
Rick
__________________
N337K-FT337GP KLOU 
|
Threaded Mode