Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Unread 05-23-21, 07:20 AM
patrolpilot's Avatar
patrolpilot patrolpilot is offline
Registered User
 
Join Date: Sep 2019
Location: South Texas
Posts: 312
patrolpilot is on a distinguished road
GAMI Injectors

Anyone switch to them?
Reply With Quote
  #2  
Unread 05-24-21, 10:38 PM
wslade2 wslade2 is offline
Registered User
 
Join Date: Feb 2016
Location: none
Posts: 303
wslade2 is on a distinguished road
I was having temp spread issues and some roughness. Cleaning OEM injectors plus doing some other things didn’t resolve. OEM injectors looked rough, corroded screens, easy to imagine poor spray patterns from cylinder to cylinder. GAMI definitely helped. Also I recall they were cheaper than replacing with OEM’s.

Continental now doing their own “GAMI thing”....imitation one of the best compliments
Reply With Quote
  #3  
Unread 05-25-21, 08:36 PM
patrolpilot's Avatar
patrolpilot patrolpilot is offline
Registered User
 
Join Date: Sep 2019
Location: South Texas
Posts: 312
patrolpilot is on a distinguished road
Thanks. Same thing here. I'm ordering them and will have them installed at my next oil change in 3 to 4 weeks.
Reply With Quote
  #4  
Unread 05-29-21, 07:26 AM
Mich3773 Mich3773 is offline
Registered User
 
Join Date: Jul 2015
Location: Canada
Posts: 35
Mich3773 is on a distinguished road
I installed them on the front engine a few years ago and am very pleased with the results; engine feels like it's running smoother, CHTs and fuel flows are equal. Note that it took three attempts to get the correct sized injectors.
Attached Images
File Type: jpg front_engine_gami_test_blank.jpg (305.4 KB, 705 views)
Reply With Quote
  #5  
Unread 05-29-21, 10:30 AM
wslade2 wslade2 is offline
Registered User
 
Join Date: Feb 2016
Location: none
Posts: 303
wslade2 is on a distinguished road
Be sure to note that they are a matched set. There are specific injectors for each cylinder. Also keep track of the old injectors. They will want them back for core.
Reply With Quote
  #6  
Unread 05-30-21, 12:17 PM
n86121's Avatar
n86121 n86121 is offline
bigcheese
 
Join Date: Nov 2003
Location: Potomac Airfield~!
Posts: 323
n86121 is on a distinguished road
GAMI on my rear engine (turbo)

Turbo 337D

On my last annual wallet-ectomy
both fuel pumps were bench overhauled with precision.
Rear throttle housing was also leaking, so it also got the treatment.

Suffice to say, whole fuel thing gone through.

My rear engine had two gnarled injectors from prior annual, that needed replacement.
TCM was back logged on injectors for months, but GAMi available next day
Decision made, went to set of GAMI

Given both precisely bench OH fuel pumps...
the two engines would otherwise seem well matched

No fancy engine analyzer.
Never saw the need.
Fuel not a major lineitem in my life, and $10,000+ cost to install F&R buys a lot of fuel.

I just find the leaner EGT, set it to 75-100F rich of peak,
then match fuel flows between engines, to keep my shadin having same flow rates F&R.

That said,...

The rear GAMI equipped engine needs almost no mixture adjustment throughout its range.
Really, almost zero. Nada. Zip.
It is as if the full range is just super precise and super narrow, full range.
While the rear I still have to fuss with mixture to get similar flows on front.

So next wallet-ectomy, going to add GAMIs on front too.

Thoughts?
__________________
David Wartofsky
Potomac Airfield
10300 Glen Way
Fort Washington, MD 20744
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 04:54 AM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.