|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
You are correct sir…. Unfortunately…
__________________
337B Philadelphia PA |
#2
|
|||
|
|||
This is what mine looked like. 1973 C337G about 2 1/2 years ago. Hopefully the pic attaches.
|
#3
|
|||
|
|||
Aircraft Tool Supply ATS Screw & Bolt Remover (10") is the screw removal tool needed for the job along with a rivet gun. I use only IRWIN IWAF31PH220 20-Piece Impact Screwdriving Phillips #2 in high torque areas like the wing panel screws. While she was opened up i would change the gaskets on the fuel senders also. I always apply a small bead of PRC on the gasket and screw heads of the senders. JoeS
ps. there is a wing and tail boom support instructions in the manual. Last edited by Joes : 02-15-24 at 08:14 AM. Reason: more info |