Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 12-11-09, 07:51 AM
Jim Rainer's Avatar
Jim Rainer Jim Rainer is offline
Jim Rainer
 
Join Date: Apr 2002
Location: Memphis, TN
Posts: 163
Jim Rainer is an unknown quantity at this point
Question Switch pnael lights

I've tried seaching the other forums with no success for a source for the electroluminescent switch panel in the 337G. Either replacement or repair thereof.

I am a pure novice at knowing how to search the forums!
Reply With Quote
  #2  
Unread 12-12-09, 07:02 PM
edasmus edasmus is offline
Registered User
 
Join Date: Nov 2006
Location: ARR - Aurora, IL - USA
Posts: 420
edasmus is on a distinguished road
Send a message via AIM to edasmus
I'm curious....anybody ever see one of these work? I have owned my airplane for 7 years and I have seen mine flicker once or twice. It seems to me I remember being told by someone (but of course I cannot recall who) that these are almost impossible to make functional. Any comments?

Thanks, Ed
Reply With Quote
  #3  
Unread 12-14-09, 08:08 PM
hharney's Avatar
hharney hharney is offline
Forum Administrator
 
Join Date: Jul 2002
Location: Michigan (8D4)
Posts: 2,253
hharney is on a distinguished road
Is this a dimmer switch? I am not following the unit you are referring to.
__________________
Herb R Harney
1968 337C

Flying the same Skymaster for 47 years
Reply With Quote
  #4  
Unread 12-14-09, 09:54 PM
WebMaster's Avatar
WebMaster WebMaster is offline
Web Master
 
Join Date: Apr 2002
Location: Cleveland, OH
Posts: 1,524
WebMaster is on a distinguished road
are you looking for an electroluminescent panel for the switch panel?? Like in cars??
There are no manufacturers of those for aircraft. The lighting is supplied by an LED embeded in the panel, with a power supply, for all the lights.

In volume, these are inexpensive, the costly part is the regulated power supply. Again, in volume the cost is low.
Getting is approved would be very difficult.
There are people who provide electroluminescent panels, that can light up the switch panel.
Reply With Quote
  #5  
Unread 12-14-09, 09:58 PM
WebMaster's Avatar
WebMaster WebMaster is offline
Web Master
 
Join Date: Apr 2002
Location: Cleveland, OH
Posts: 1,524
WebMaster is on a distinguished road
Or is this what you mean??
http://electroluminescence-inc.com/howtouseEL.htm
Reply With Quote
  #6  
Unread 12-15-09, 12:29 AM
stackj stackj is offline
Registered User
 
Join Date: Apr 2002
Location: Richmond, VA
Posts: 311
stackj is an unknown quantity at this point
Send a message via AIM to stackj
You might want to talk to Ken Whitaker ( Sales@SPTPanel.com ). Ken is based at Chesterfield Airport and manufactures both Electroluminescent strips and LED with fiber optic lighting.
__________________
Jim Stack
Richmond, VA
Reply With Quote
  #7  
Unread 12-15-09, 12:39 PM
Jim Rainer's Avatar
Jim Rainer Jim Rainer is offline
Jim Rainer
 
Join Date: Apr 2002
Location: Memphis, TN
Posts: 163
Jim Rainer is an unknown quantity at this point
Panel lights

This is the panel at the pilot's knee that lights up the mag switches, clowl flap switches and all the other switches, etc. I don't really know what I'm talking about but I was told it is a sandwich type of panel and that when one puts 110 volts to it it lights up. It is connected to the panel light dimmer (which works fine.) I don't think it is LED but I may be wrong. The power supply is an inverter to provide 110 volts I have been told.

Mine has been out for 11 years. Thanks, Jim Stack, I'll contact Ken Whitaker.
Reply With Quote
  #8  
Unread 12-15-09, 12:42 PM
Jim Rainer's Avatar
Jim Rainer Jim Rainer is offline
Jim Rainer
 
Join Date: Apr 2002
Location: Memphis, TN
Posts: 163
Jim Rainer is an unknown quantity at this point
Panel lights

Larry's suggestioin may be the best - don't try to repair or replace the thing, just get a string light above the panel to light it up. I'm sure this is the least expensive way to go.
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 10:58 AM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.