Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #16  
Unread 10-08-18, 11:23 AM
JAG JAG is offline
Registered User
 
Join Date: Jun 2014
Location: Texas
Posts: 260
JAG is on a distinguished road
Hi Dennis,
Thanks for your reply. I am sorry for my last post if you took exception - my criticism was directed at the maintenance provider, not you. I think you are doing the right thing in going over the aircraft in that level of detail. It removes the chances of every surprise, and it is very detailed and thorough. Thanks for explaining how you broke down the defects between airworthy and customer request. Typically, this is how I see defects listed even from a shop.

Sorry if my post was misunderstood - I was being picky about how the maintenance shop was presenting their work.

Kind regards,
Jeff
Reply With Quote
  #17  
Unread 10-08-18, 03:24 PM
Skywalker Skywalker is offline
Registered User
 
Join Date: Dec 2017
Location: POLAND
Posts: 71
Skywalker is on a distinguished road
Quote:
Originally Posted by JAG View Post
Hi Dennis,
Thanks for your reply. I am sorry for my last post if you took exception - my criticism was directed at the maintenance provider, not you. I think you are doing the right thing in going over the aircraft in that level of detail. It removes the chances of every surprise, and it is very detailed and thorough. Thanks for explaining how you broke down the defects between airworthy and customer request. Typically, this is how I see defects listed even from a shop.

Sorry if my post was misunderstood - I was being picky about how the maintenance shop was presenting their work.

Kind regards,
Jeff
Good Evening Jeff
really nothing, i did not take any thing personal about your post, and i was just trying to explain why this language was . ;very simple ; and really i am very glad with maintenance shop,s way of performing their duty, with great honestly, , i am really confident that ,i am in very competent hands and can trust the shop.
Reply With Quote
  #18  
Unread 12-17-18, 12:29 PM
kilr4d's Avatar
kilr4d kilr4d is offline
Registered User
 
Join Date: Mar 2016
Location: CNC3
Posts: 265
kilr4d is on a distinguished road
Hi Dennis,

What's the status of your plane?
__________________
_________
John K
1977 337G
CNC3
Reply With Quote
  #19  
Unread 12-17-18, 04:53 PM
Skywalker Skywalker is offline
Registered User
 
Join Date: Dec 2017
Location: POLAND
Posts: 71
Skywalker is on a distinguished road
Quote:
Originally Posted by kilr4d View Post
Hi Dennis,

What's the status of your plane?
Hello John
the delivery is delayed, we found some more issue, like broken Aileron cable and now we are also checking all control cables ;more thouroghly ; sound proofing patterns were cut wrong by soundex and we have to send them back ;-(((
and also i asked the work shop to slow down the work, due to the winter weather , we will not be able to cross the Atlantic, we plan for the pick up end February ,when weather gets less hostile
Regards
Dennis
Reply With Quote
  #20  
Unread 12-30-18, 04:54 PM
Ken MacLean Ken MacLean is offline
Registered User
 
Join Date: Oct 2003
Location: Northboro, MA
Posts: 19
Ken MacLean is an unknown quantity at this point
Quote:
Originally Posted by Skywalker View Post
Fuel selectors never overhauled also around 1700 USD each , Installed
but as wrote before Owner reduced the price and for the preventive items , i will have to pay ,
Dennis
Be careful when overhauling the fuel selectors. I sent out my rear selector and installed it on return. I did a complete ground run up at full power with no problems. When I took off the rear engine began surging at 800 AGL and ended up with a preventive shutdown. The problem ended up being the overhaul shop installed new seats in the selector that were 20 thousands too small and limited adequate fuel flow for sustained high power operation. It ended up ok but would have been a disaster if both selectors had been overhauled at the same time.
Reply With Quote
  #21  
Unread 12-31-18, 07:21 AM
Skywalker Skywalker is offline
Registered User
 
Join Date: Dec 2017
Location: POLAND
Posts: 71
Skywalker is on a distinguished road
Quote:
Originally Posted by Ken MacLean View Post
Be careful when overhauling the fuel selectors. I sent out my rear selector and installed it on return. I did a complete ground run up at full power with no problems. When I took off the rear engine began surging at 800 AGL and ended up with a preventive shutdown. The problem ended up being the overhaul shop installed new seats in the selector that were 20 thousands too small and limited adequate fuel flow for sustained high power operation. It ended up ok but would have been a disaster if both selectors had been overhauled at the same time.
Hello Ken
thanks for the feed back, just forwarded your message to Brant Aero
Happy New Year
Dennis
Reply With Quote
  #22  
Unread 01-02-19, 07:08 AM
Skywalker Skywalker is offline
Registered User
 
Join Date: Dec 2017
Location: POLAND
Posts: 71
Skywalker is on a distinguished road
Quote:
Originally Posted by Skywalker View Post
Hello Ken
thanks for the feed back, just forwarded your message to Brant Aero
Happy New Year
Dennis
Ken
could pls give me the contact detail of the workshop which did the overhaul of the fuel selector
as We could not find any and Brant Aero , did it in house, but it would be good to have some one who specialises in it??
Dennis
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 07:05 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.