Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #46  
Unread 10-14-05, 08:30 PM
Keeler Keeler is offline
Registered User
 
Join Date: Dec 2004
Location: Helong - HEG
Posts: 7
Keeler is an unknown quantity at this point
Pat,

I am in the process of installing a Dynon in my O-2A. I thught it was all downhill after I purchased the unit, but was I wrong. I have down loaded the previous threads, but (surprise) my avionics wizard would like to see copies of any FAA approved paperwork.

Can you help.

Any advise is appriciated.

George Keeler

Last edited by Keeler : 10-15-05 at 09:11 AM.
Reply With Quote
  #47  
Unread 11-09-05, 11:14 AM
Pat Schmitz Pat Schmitz is offline
Member
 
Join Date: Mar 2004
Location: Midwest
Posts: 104
Pat Schmitz is an unknown quantity at this point
Jack -

Shared the 337 form today with another flyer - he is asking for the back page of the 337 form - apparently there is addtional information on it that is needed?

Could you fax that side of the 337 to me? I will add it to the distribution for those that want it. Same fax as listed above - 563-922-3033.

George - send me your email - I'll forward to you too!

Thanks!

Last edited by Pat Schmitz : 11-09-05 at 11:17 AM.
Reply With Quote
  #48  
Unread 11-09-05, 02:37 PM
wybenga wybenga is offline
Registered User
 
Join Date: Feb 2005
Location: T31
Posts: 21
wybenga is an unknown quantity at this point
Will send it to you on monday

Jack
________
ILoveLove

Last edited by wybenga : 09-01-11 at 05:41 AM.
Reply With Quote
  #49  
Unread 11-09-05, 07:36 PM
Keeler Keeler is offline
Registered User
 
Join Date: Dec 2004
Location: Helong - HEG
Posts: 7
Keeler is an unknown quantity at this point
Pat.

Thank you.

My e-mail is 1gck@bellsouth.net

George
Reply With Quote
  #50  
Unread 12-27-05, 01:29 AM
Pat Schmitz Pat Schmitz is offline
Member
 
Join Date: Mar 2004
Location: Midwest
Posts: 104
Pat Schmitz is an unknown quantity at this point
Question DYNON EFIS INSTALLATION

Ok - I get requests for this paperwork almost weekly - and surprisingly - about 1/2 the time from Non-337 pilots....

I would like to take a quick poll to see who has since completed this installation and the requisite 337 forms successfully?

The paperwork I have was not sufficient to convince my local FSDO officer to approve it..... he never said no - but rather he would look into it.... and has never, ever responded... I want to pursue this further - and I am hoping that there are others out there who have curagious and open-minded FAA Inspectors...

Perhaps there are 2 or 3 of you who have completed this, and I can again get copies of the paperwork for others who wish to take advantage of it??

Thanks, and Happy Holidays!!
Reply With Quote
  #51  
Unread 03-24-06, 07:55 AM
WebMaster's Avatar
WebMaster WebMaster is offline
Web Master
 
Join Date: Apr 2002
Location: Cleveland, OH
Posts: 1,524
WebMaster is on a distinguished road
Another good reason, but sad.
http://youtube.com/watch?v=ZWC2XJYgcJU
Reply With Quote
  #52  
Unread 04-27-06, 06:08 AM
bawb bawb is offline
Member
 
Join Date: Aug 2002
Posts: 22
bawb is an unknown quantity at this point
I got field approval to put a Dynon EFIS front and center in a C-150. The inspector looked at the 337 for about 30 seconds, said "Wow" and signed it.
Reply With Quote
  #53  
Unread 04-27-06, 10:38 AM
Keven
Guest
 
Posts: n/a
I spoke with a Dynon Rep at Sun N Fun and he said that all prior field approvals for certificated birds are going to be revoked by the FAA.

He was none too pleased, but said that they are not even going to be approved for "VFR" reference only. He said that the FAA told him in no uncertain terms that there would not be any of these in certificated planes.

FWIW.

Keven
________
HOME MADE VAPORIZER

Last edited by Keven : 04-23-11 at 05:19 PM.
Reply With Quote
  #54  
Unread 04-27-06, 09:52 PM
Richard Richard is offline
Registered User
 
Join Date: May 2002
Location: Pacific NW
Posts: 210
Richard is an unknown quantity at this point
Sounds like they are trying to put the final nails in the GA coffin.

You know. You can make them fairly easily removable.
Reply With Quote
  #55  
Unread 04-27-06, 09:57 PM
Keven
Guest
 
Posts: n/a
I did not know that, but if so, that's probably the future of their market/product. A shame too, because I flew an experimental a couple of weeks ago that had the full set up and it was very slick.

It would be near the top of my list if it weren't for the uncertainty.

Keven
________
PENNY STOCKS

Last edited by Keven : 04-23-11 at 05:19 PM.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 08:42 AM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.