Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 02-07-21, 08:29 PM
Jhogan0101's Avatar
Jhogan0101 Jhogan0101 is offline
Registered User
 
Join Date: Mar 2019
Location: Philadelphia
Posts: 186
Jhogan0101 is on a distinguished road
Control Quadrant Clevis Pin Part Number?

Looks like some past “improvising” was done.
I looked in parts manual but they dont include this pin in any diagrams that i can see.
I want to make sure to install the correct part number.
Any idea? 337B

https://ibb.co/6sK6dsw
https://ibb.co/NsKc2XD
__________________
337B
Philadelphia PA
Reply With Quote
  #2  
Unread 02-08-21, 08:50 AM
cessnadriver's Avatar
cessnadriver cessnadriver is offline
Registered User
 
Join Date: May 2010
Location: Kempner, TX
Posts: 359
cessnadriver is on a distinguished road
Smile Control Quadrant Clevis Pin Part Number?

J.
The bolt may seem to be incorrect but it's not. Fig 89/Item 8 Rear prop, Quad end. ATTACHING PARTS: AN 3-11A Bolt, NAS 679A3 Nut, NAS 43HT3-11 Spacer.
Hope this helps.
Regards.
BILLS
'65 C337
Reply With Quote
  #3  
Unread 02-08-21, 11:14 AM
Jhogan0101's Avatar
Jhogan0101 Jhogan0101 is offline
Registered User
 
Join Date: Mar 2019
Location: Philadelphia
Posts: 186
Jhogan0101 is on a distinguished road
Bills,
In my fig 89/8 it shows the connection on the engine and not the control quadrant.
Is yours different?

https://ibb.co/xXzqh6k
https://ibb.co/JH7tSGH
__________________
337B
Philadelphia PA
Reply With Quote
  #4  
Unread 02-08-21, 12:49 PM
cessnadriver's Avatar
cessnadriver cessnadriver is offline
Registered User
 
Join Date: May 2010
Location: Kempner, TX
Posts: 359
cessnadriver is on a distinguished road
Question Control Quadrant Clevis Pin Part Number?

J. Sorry your skymaster must be newer than mine. But the same info for the rear prop should be the same, just different Fig/Item number.
BILLS
Reply With Quote
  #5  
Unread 02-08-21, 03:55 PM
JAG JAG is offline
Registered User
 
Join Date: Jun 2014
Location: Texas
Posts: 260
JAG is on a distinguished road
337a

JHogan,

Your quadrant hardware is correct - bolts with spacers and nuts on the prop controls. My 66 has the same set up. Figure 89, item 7, has the listing for the hardware for the prop control, says "QUADRANT END OF CONTROL".

Jeff

Last edited by JAG : 02-08-21 at 04:03 PM.
Reply With Quote
  #6  
Unread 02-08-21, 09:55 PM
Jhogan0101's Avatar
Jhogan0101 Jhogan0101 is offline
Registered User
 
Join Date: Mar 2019
Location: Philadelphia
Posts: 186
Jhogan0101 is on a distinguished road
Thanks guys.
It Just didnt look right to me.
Looks to me like some type of factory work around to avoid the rudder trim chain.
Makes sense now 👍
__________________
337B
Philadelphia PA
Reply With Quote
  #7  
Unread 02-09-21, 01:19 PM
Jhogan0101's Avatar
Jhogan0101 Jhogan0101 is offline
Registered User
 
Join Date: Mar 2019
Location: Philadelphia
Posts: 186
Jhogan0101 is on a distinguished road
I received an email from textron today with photos from their magic cessna books if anyone wants to see attached photos

https://ibb.co/J2xKLkz
https://ibb.co/7KFzNXb
https://ibb.co/JFd3d3Z
__________________
337B
Philadelphia PA
Reply With Quote
  #8  
Unread 02-09-21, 06:16 PM
cessnadriver's Avatar
cessnadriver cessnadriver is offline
Registered User
 
Join Date: May 2010
Location: Kempner, TX
Posts: 359
cessnadriver is on a distinguished road
Smile Control Quadrant Clevis Pin Part Number?

J.
Thanks for the photos. Nice information for Skymaster Owners/mechanics.
Regards, BILLS
Reply With Quote
  #9  
Unread 02-18-21, 08:07 PM
hharney's Avatar
hharney hharney is offline
Forum Administrator
 
Join Date: Jul 2002
Location: Michigan (8D4)
Posts: 2,253
hharney is on a distinguished road
https://www.wagaero.com/hardware/cle...0392-2c11.html


MS20392-2C11
Attached Images
File Type: png Screen Shot 2021-02-18 at 8.04.26 PM.png (221.7 KB, 642 views)
__________________
Herb R Harney
1968 337C

Flying the same Skymaster for 47 years
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 06:07 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.