Rail Seat for 1976 SkyMaster

RDG · #1 01-08-04, 11:27 PM

I am looking for the split bench rail seat (second seat) that slides back to the fire wall. I have a 1976 pressurized SkyMaster. Any assitance on where to look would be appreciated.

Roger Griggs
859-384-0030

WebMaster · #2 01-09-04, 10:55 AM

talk to Don Neiser. That would be the first call, his number is in the "parts" section of the message board. I've had some success getting parts from Global Air, in Canada. Can't remember how to find them, but internet search should work.

kevin · #3 01-09-04, 07:19 PM

In addition to Don, Ernie Martin has some nice suggestions on purchasing parts, see http://www.skymasterus.org. Also, if you are a member, the CPA is a good place to get parts source suggestions, see www.cessna.org.

Kevin

Rickskymaster · #4 01-10-04, 05:57 AM

Owen Bell is the best guy I have found.
He wants 10,000 for the rails, a thousand each, if he can find them, otherwise it is a 6 month wait from Cessna.
The rest comes for installation and STC etc.
Good luck
Owen's number can be found in the resoures section.
Rick Galvin