|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
1. Leading Edge Cuff
2. Stall Fence 3. VG's on rear cowl 4. Boom to Vertical Cuff 5. Wing Tips (various extremes) The only item that I have seen partially done is the wing tips. Use the factory Cessna tips or buy the Droop tips from Horton
__________________
Herb R Harney 1968 337C Flying the same Skymaster for 47 years |
#2
|
||||
|
||||
Horton Stol Performance
Hello ALL.
I threaded this before about the wing tips for the skymaster. I didn't like the SUPER droops, the ones that extend about 18" below the bottom of the wing, that came with the Horton kit. I ended up talking to one of the original engineers from Horton, and he told me that you HAVE TO HAVE some amount of droop on the tips. So I sent him pictures of the tips I purchased from a SOAPA member. It looks like single engine Cessna tip, that droops about 4" from the bottom of the wing. He told me that would be fine! He also sent me a blue print of the kit showing a less severe tip with Cessna part numbers.The plane flys fine with these tips and make OUR Skymasters look better than those ugly super droops. Hope this helps. BILLS |