Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 01-04-18, 05:41 AM
kragby kragby is offline
Registered User
 
Join Date: Mar 2015
Location: US
Posts: 40
kragby is on a distinguished road
JPI 960 engine monitor for P337G

Anyone installed the 960 in a P model? I'm finding the installation on the front engine is a real problem in keeping to a constant distance from the cylinder of 2 to 4 inches especially on the front engine right side. No. 5 exhaust is very short and the pipe clamps on the other two are right in the way. Wondering if anyone came up with a good fix. JPI has been no help with this. Thanks in advance.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 06:46 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.