Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 08-05-10, 01:01 PM
jchronic jchronic is offline
Registered User
 
Join Date: Apr 2009
Location: Mass
Posts: 100
jchronic is on a distinguished road
Engine O-H / FREM Cost

Hi Gang:

I did a search but didn't find a direct answer to this question: Is $30K (give or take) a good ballpark guess for putting zero time engines on a Skymaster? Not trying to start a long thread or plow old ground, just looking to understand what's a reasonable range of cost.

Thanks-
Ahab
Reply With Quote
  #2  
Unread 08-05-10, 01:52 PM
K337A's Avatar
K337A K337A is offline
Registered User
 
Join Date: Jul 2009
Location: USA
Posts: 35
K337A is on a distinguished road
Airpower O/H = 29,663 Warranty=12 months/500 hrs, 180 days after invoice
New = 35,427 Warranty=12 months/1000 hrs, 180 days after invoice
Reply With Quote
  #3  
Unread 08-05-10, 02:55 PM
ipasgas1 ipasgas1 is offline
Registered User
 
Join Date: Feb 2005
Location: cincinnati, ohio
Posts: 71
ipasgas1 is on a distinguished road
That is per engine, I assume. You couldn't do both engines for 30K, could you?
Reply With Quote
  #4  
Unread 08-05-10, 03:15 PM
Ernie Martin's Avatar
Ernie Martin Ernie Martin is offline
Administrator
 
Join Date: Apr 2002
Location: Miami, Florida
Posts: 989
Ernie Martin is an unknown quantity at this point
I think Ahab's inquiry was two engines for $30,000, but I agree that the the first reply seems to be for one engine. The new price seems way too low for two engines, but I'm confused because the overhaul price seems high for one engine and pretty aggressive for two engines.

So I contacted Certified Engines and got a quote of $21,500 ($24,800 with new cylinders) for one engine (including magnetos, harness, spark plugs, fuel injection system, fuel pump, starter, alternator, oil cooler, and a new logbook, but with the usual caveats, including a serviceable crankcase and VAR crank, warranty may be seen at www.certifiedengines.com). I think a $15,000 overhaul may be possible with a qualified mechanic (not a shop) and perhaps skipping some accessories (e.g., starter).

Ernie
Reply With Quote
  #5  
Unread 08-05-10, 08:27 PM
jchronic jchronic is offline
Registered User
 
Join Date: Apr 2009
Location: Mass
Posts: 100
jchronic is on a distinguished road
Nope Ernie, I just didn't phrase my question very clearly. I was asking in regard to $30K per engine, a figure I've heard bandied about here locally. It sounded just a tad high to me, hence my checking with you guys who have more experience with the airplane than I.

I would have been pleasantly surprised - amazed, maybe? - if both could be done for $30K.

Thanks for the responses.

Ahab
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 03:00 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.