Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 01-22-05, 06:34 PM
ron minichello ron minichello is offline
Member
 
Join Date: Jan 2005
Location: n.c
Posts: 1
ron minichello is an unknown quantity at this point
337 Voltage Regulators

Needing Part # C611002-0105 28 VOLT VOLTAGE REGULATORS IN ANY CONDITION.. ( NEW USED OR REBUILDABLE CONDITION ) E-MAIL RJM8484@EARTHLINK.NET OR CALL 1-336-623-4704
Reply With Quote
  #2  
Unread 01-23-05, 06:40 AM
WebMaster's Avatar
WebMaster WebMaster is offline
Web Master
 
Join Date: Apr 2002
Location: Cleveland, OH
Posts: 1,524
WebMaster is on a distinguished road
the zeftronics unit will work in your skymaster, and last i checked, they were $30-$40 at aircraft spruce
Reply With Quote
  #3  
Unread 01-23-05, 10:38 AM
KyleTownsend KyleTownsend is offline
Member
 
Join Date: Feb 2004
Location: TN
Posts: 135
KyleTownsend is an unknown quantity at this point
I just bought two of the zeftronics units direct. They were around $100 per. Haven't installed them yet.

Curious to know how everyone is dealing with the famous "flickering lights" of the Skymasters.

It's been my experience that it's not much of an issue when everything is just right (voltage regulators well calibrated; switch, fuse and wire resistance OK, etc.). However, I have had a couple of rounds with it (one right now).

I am really tempted to do a STC for installing a simplified system with paralleling (3-wire) regulators (ala Tom Carr at CPA). Supposedly, this helps the flickering / nervous ammeter problem, and is much better at insuring that the alternators share the load evenly. Curious if anyone has done this and how it worked out.

kt
Reply With Quote
  #4  
Unread 01-24-05, 06:27 PM
Jerry De Santis's Avatar
Jerry De Santis Jerry De Santis is offline
TAS (Thin Air Seeker)
 
Join Date: Apr 2002
Location: Battle Creek, Mi
Posts: 457
Jerry De Santis is on a distinguished road
Voltage Reg.

Kyle, The Voltage Reg. are adjustable. A good mechanic should be able to do it and tune each one in.

Jerry
N34EC
Reply With Quote
  #5  
Unread 01-24-05, 09:23 PM
Mark Hislop Mark Hislop is offline
Registered User
 
Join Date: May 2002
Location: Aurora, IL (ARR)
Posts: 171
Mark Hislop is an unknown quantity at this point
Flickering Lights

Kyle:

Define flickering lights. If you are referring to the amber alternator lights flashing on and off as the alternators take turns picking up the load, the paralleling regulator modification will help. If you are referring to the rapid flickering of your instrument lights, the regulator mod will not help that. The flickering of instrument lights is due to rapid voltage fluctuations. This is caused by resistance in the regulator circuit. The resistance can be in dirty or corroded connections, the field circuit breakers, the alternator field switches, or the master switch. It takes a very little amount of extra resistance to make the system start to "hunt" or chase, causing the voltage to rapidly rise and fall, casuing the lights to get brighter and dimmer.

The good news is that the problem is not terribly expensive to fix. Clean all connections in the field side of the alternator and regulator wiring. Replace, if required, the alternator field switches, the master switch, and the field circuit breakers. Your lights will stop flickering, at least for a while.

Mark
__________________
Mark Hislop
N37E
Reply With Quote
  #6  
Unread 01-25-05, 10:45 AM
Dale Campbell's Avatar
Dale Campbell Dale Campbell is offline
Owner 337H N337DC
 
Join Date: Apr 2002
Location: Scranton, Pa.
Posts: 276
Dale Campbell is an unknown quantity at this point
Good Luck on making lights stop blinking

I have spent many dollars trying to stop the blinking lights.
I had the parallel system put in. Had both coupling replace on two alternaters. Had one new alternator installed. New battery, all diodes on fire wall replaced in regulators circuit. Some wiring replaced. Some breakers replaced. Each time the A&P said it is ok.
Well each time it was for about 10 hours. Then the lights start the blinking again. It does it more when battery is up to full charge. If you turn on a lot of devices to demand more electric power they do not blink as much. But you will never get it to stop for good. I finally gave up and just live with it. Good luck!!! Dale
Reply With Quote
  #7  
Unread 10-12-17, 12:47 PM
linnflohr linnflohr is offline
Registered User
 
Join Date: Aug 2013
Location: none
Posts: 2
linnflohr is on a distinguished road
Quote:
Originally Posted by Mark Hislop View Post
Kyle:

Define flickering lights. If you are referring to the amber alternator lights flashing on and off as the alternators take turns picking up the load, the paralleling regulator modification will help. If you are referring to the rapid flickering of your instrument lights, the regulator mod will not help that. The flickering of instrument lights is due to rapid voltage fluctuations. This is caused by resistance in the regulator circuit. The resistance can be in dirty or corroded connections, the field circuit breakers, the alternator field switches, or the master switch. It takes a very little amount of extra resistance to make the system start to "hunt" or chase, causing the voltage to rapidly rise and fall, casuing the lights to get brighter and dimmer.

The good news is that the problem is not terribly expensive to fix. Clean all connections in the field side of the alternator and regulator wiring. Replace, if required, the alternator field switches, the master switch, and the field circuit breakers. Your lights will stop flickering, at least for a while.

Mark
Where is the data on the paralleling ? I had my field CB blow and found out we do NOT have true electric redundancy . Emergency situation if you are IMC!
Reply With Quote
  #8  
Unread 10-12-17, 12:51 PM
linnflohr linnflohr is offline
Registered User
 
Join Date: Aug 2013
Location: none
Posts: 2
linnflohr is on a distinguished road
Paralleling

Quote:
Originally Posted by Mark Hislop View Post
Kyle:

Define flickering lights. If you are referring to the amber alternator lights flashing on and off as the alternators take turns picking up the load, the paralleling regulator modification will help. If you are referring to the rapid flickering of your instrument lights, the regulator mod will not help that. The flickering of instrument lights is due to rapid voltage fluctuations. This is caused by resistance in the regulator circuit. The resistance can be in dirty or corroded connections, the field circuit breakers, the alternator field switches, or the master switch. It takes a very little amount of extra resistance to make the system start to "hunt" or chase, causing the voltage to rapidly rise and fall, casuing the lights to get brighter and dimmer.

The good news is that the problem is not terribly expensive to fix. Clean all connections in the field side of the alternator and regulator wiring. Replace, if required, the alternator field switches, the master switch, and the field circuit breakers. Your lights will stop flickering, at least for a while.

Mark
Where can I find the info on paralleling please?
Reply With Quote
  #9  
Unread 10-12-17, 07:55 PM
hharney's Avatar
hharney hharney is offline
Forum Administrator
 
Join Date: Jul 2002
Location: Michigan (8D4)
Posts: 2,261
hharney is on a distinguished road
A simple use of the search feature found this

http://www.337skymaster.com/messages...ht=Paralleling

http://www.337skymaster.com/messages...ht=Paralleling
__________________
Herb R Harney
1968 337C

Flying the same Skymaster for 47 years

Last edited by hharney : 10-12-17 at 10:39 PM.
Reply With Quote
  #10  
Unread 10-14-17, 04:49 PM
n86121's Avatar
n86121 n86121 is offline
bigcheese
 
Join Date: Nov 2003
Location: Potomac Airfield~!
Posts: 329
n86121 is on a distinguished road
Lightbulb Panel lights

You just have to realize these are flying dinosaurs. The voltage will drool up and down a bit, and so will your panel lights. If you have a digital voltage gauge somewhere you will see even cars do the same, as the battery and alternator and loads chase each other around.

Once way to fix that panel light issue is to voltage limit the supply side reference voltage of the dimmer circuit, the NPN TO3 transistor to a constant source. For example, a 20 volt zener diode to ground with a resistor to b+, then feed the totally stable 20V into the top of the reference for the dimer circuit. Now you have literally voltage regulated lighting.

Of course, I am not familiar with any FAA approval to do so.
__________________
David Wartofsky
Potomac Airfield
10300 Glen Way
Fort Washington, MD 20744
Reply With Quote
  #11  
Unread 10-16-17, 12:35 AM
LostKiwi's Avatar
LostKiwi LostKiwi is offline
Registered User
 
Join Date: Jan 2016
Location: Canada, eh.
Posts: 56
LostKiwi is on a distinguished road
My airplane came with the 60 amp alternators, and the Zeftronics regulators installed. There doesn't seem to be any adjustment available, but I don't get any weird flickering lights.

I do have a volt meter and dual ammeters. She's pretty stable, has about a 10amp draw with everything turned on.

One observation I've made is that a good charge in the battery seems to make the whole thing run nicer. If the battery is low for one reason or another, the front alternator will output a much higher voltage, to the point where it can kick the rear alternator offline.

If I've been away for a period of time (I travel a lot due: work) I make a habit of pulling the battery and throwing it on charge for an hour or so. A battery minder would probably be a good investment.

Leighton.
Reply With Quote
  #12  
Unread 10-18-17, 10:29 PM
DrDave DrDave is offline
Registered User
 
Join Date: Nov 2010
Location: Seattle
Posts: 115
DrDave is on a distinguished road
Lostkiwi:

Does the voltage on the front alternator rise or does the current from the front alternator go up?

If it is the latter, which makes more sense, the front alternator is sensing the load more than the rear alternator. This can be resistance in the field circuit, output side, or ground circuit. Please report more information.

Dave
Reply With Quote
  #13  
Unread 10-21-17, 11:27 AM
rrice rrice is offline
Registered User
 
Join Date: Aug 2006
Location: Ann Arbor, MI
Posts: 39
rrice is an unknown quantity at this point
I have a couple of 337 regulators from our 337c. Need to check the numbers.
__________________
Thanks

Robert Rice
Great Commission Air
www.GreatCommissionAir.org
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 07:48 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.