Skymaster Forum

Skymaster Forum (http://www.337skymaster.com/messages/index.php)
-   Messages (http://www.337skymaster.com/messages/forumdisplay.php?f=1)
-   -   Dukes Fuel Pump (http://www.337skymaster.com/messages/showthread.php?t=5651)

Burt 11-26-25 06:12 PM

Dukes Fuel Pump
 
Does anyone know where I can get parts for my Dukes aux fuel pumps? They are very easy to overhaul if parts could be found.

Frank Benvin 11-27-25 09:39 AM

I bought complete units from aircraft accessories You can check if they sell parts

https://aircraftaccessoriesofok.com/

Frank

Burt 11-27-25 06:45 PM

Thanks, I will check with them.

Joes 11-29-25 10:55 PM

PMAD Weldon 18000 Fuel Pumps

Frank Benvin 11-30-25 11:32 AM

Quote:

Originally Posted by Joes (Post 30785)
PMAD Weldon 18000 Fuel Pumps

This pump is only certified for the E model and newer -
Good for these models - 337E, 337F, T337E, T337F, F337E, F337F, FT337E, FT337F, 337F, T337G, P337H, FT337GP, FP337H, 337G, 337H, F337G, F337H, T337H

I have a 337b and replace it with the dukes as it was certified for my 337

Frank

-

Burt 12-09-25 10:23 AM

Dukes Fuel Pump
 
After an exhaustive on-line search and many phone calls I gave up trying to find the part that I needed and ordered a new pump so I will be back in the air in a few days. I am keeping my old pump since it was functioning perfectly except for a very slow leak along the shaft due to the "bearing and seal assembly" being worn. It still has many serviceable parts including the motor.

I discovered that McFarlane lists most of the parts for many aux pumps but not the part that I needed. McFarlane owns CJ Aviation which is the only authorized repair/overhaul facility for Dukes pumps that I could find in addition to the original manufacturer but CJ will not release the part that I needed. And of course Aero Fluid Products (formerly Dukes Aerospace) does not sell any parts but they will repair/overhaul my old pump. So I may send them my leaking pump to fix and keep it for a spare.

Burt

edasmus 12-09-25 02:13 PM

Thank you for sharing the information. Good Luck..., Ed


All times are GMT -4. The time now is 07:56 PM.

Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.