|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#2
03-17-10, 01:20 AM
|
|||
|
|||
|
Hi,
I'm not up on the H models, but on the B models there is a microswitch on the powerpack that will cause this exact problem. Either replace the switch, which is about 25 dollars or try cleaning it with electrical contact cleaner. Last edited by Tony : 03-17-10 at 01:22 AM. 
|
|
#3
03-17-10, 08:37 AM
|
||||
|
||||
|
Gear Switches
Ok Roger,
When I get the new ones, I will let you know when they get installed. I will also check out that switch on power pack. Thanks Guys, Dale
|
|
#4
03-17-10, 08:04 PM
|
|||
|
|||
|
Switches
The H model doesn't have a switch on the power pac The switches on the mains are the cheap ones, the one on the nose gear is @ $450.00. We just had a wire break on an uplock switch, the pilot wasn't paying attention and fried the power pac motor. You may also want to check the switch rigging making sure it's compressing
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
