Current engine reman/rebuild/replacement prices?

[n86121]

So the turbocharger (Part no 406-970) was upgraded sometime in the past, circa 1998?

Then overhauled more recently 2011. That's 13 years. I can live with that.

So the overhaul was about $3500 or so by 'Approved Turbo' in Vero Beach FL, as I recall.

As with any turbo twin maintenance and cost.....it is all a blur...

[rmorris]

1) Last time I had turbos overhauled (which is not too far back) it was well north of 6K each...I also used ATC, but maybe I didn't say the magic words?

2) no one has any comments on different engine options (other than just throw in another of the same)?

[Red Air Rambo]

Originally Posted by rmorris

1) Last time I had turbos overhauled (which is not too far back) it was well north of 6K each...I also used ATC, but maybe I didn't say the magic words?

2) no one has any comments on different engine options (other than just throw in another of the same)?

I thought mine was around $3500, maybe it depends on how many parts they have to replace? FYI I also used them and was completely satisfied,

Only other engine option I can think of other than the turbo-prop test mule would be Riley's 520 Super Sky Rocket. Probably cheaper to find one than convert one though.

Brent

[Red Air Rambo]

Originally Posted by Red Air Rambo

I thought mine was around $3500, maybe it depends on how many parts they have to replace? FYI I also used them and was completely satisfied,

Only other engine option I can think of other than the turbo-prop test mule would be Riley's 520 Super Sky Rocket. Probably cheaper to find one than convert one though.

Brent

They have quite a good climb rate, both dual and single engine, I just did not like the weight penalty, or the exclusiveness of parts. People I know that had them loved them. The climb rate is around 750 single and 2500 fpm both, it can go....but with fuel burn to match.

[edasmus]

I just thought I'd post that my Skymaster is through the annual and it went reasonably well. Engines seem to be all good with clean filters, good compression's, and scoping all cylinders yielded all "pretty" pictures of valves. Soooo, carry on I shall. Two factory engines installed in 1988 that now have about 1570 SFRM. Hoping for another good year.

Thanks, Ed