Center seat headset plugs

[Frank Benvin]

My jacks are in the arm rests

[TomM]

Do you have, or can you get a picture Frank? In my 172 I had jacks shoved in the arm rests as well so I think I know what you are talking about, but a picture would be great. Thanks!

[Frank Benvin]

Will try and get one this weekend for you

Frank

[frank.oconnor19]

My jacks are in center ceiling. My 337 is pressurized so the O2 generators and breakers are in the center as well, still fits well.

[TomM]

Thanks much for the picture! I like that interior!

My headliner is more like Herb's with the overhead council ending and a zipper in the headliner from that point back. So where yours are located I just have a zipper. I looked at some pictures of the headliner and there is a little room left between the O2 controls and the end of the surrounding trim, but I have no idea of what it looks like there with the O2 system.

I am liking and leaning towards either the side wall or arm rests.

[JAG]

Hi Tom,
Here is a few pictures of my installation I am currently completing on the middle row jacks. I am installing them just under the arm rests - seemed to be best location for when seated and will not interfere with passenger, seat or egress. For the last row, I mounted on the bulkhead - lower portion, just above the vent to the outside. That one is not recessed. The mounts I purchased from Aircraft Spruce.

Regards,
Jeff

[TomM]

Thanks Jeff, I think that is exactly what I am going to go with. The pictures really help out, much appreciated!!