What’s up with the jack stands?

[hharney]

I see you bought the jack pads from Aircraft Spruce, I have never used these type and they look totally different from the factory pads that are used on Skymaster. Not sure that is the problem but I think those pads you have are made by Bogart and they may say they work for Skymaster but I have never seen these used. I looked for a photo of the factory units but nothing comes up. I won't be home until Monday but maybe someone else has a Photo

Part number 1400110-2

[JAG]

Here is a picture of my jack pad installed on the RH Wing. I am not sure if these are Cessna Original jack pads, but they are crap. I am going to purchase a set of those yellow Bogert pads for my bird. With the shape of the jack pad ball, they will fit better in my jacks (Alpha Jacks) and be much safer.

Jeff

[kilr4d]

I have the Bogert units. They fit well and keep my plane stable on the jacks.

https://bogertaviation.com/collectio...-337-jack-pads

[JAG]

Thanks John - that was the feedback that I was hoping for.
Jeff

[Trippster]

Originally Posted by kilr4d

I have the Bogert units. They fit well and keep my plane stable on the jacks.

https://bogertaviation.com/collectio...-337-jack-pads

Any chance you have a picture of your plane on the jack stands using the Bogert jack pads? This is what we have, but if you look at my picture it looks a little scary and unaligned.
Thanks,

[kilr4d]

Originally Posted by Trippster

Any chance you have a picture of your plane on the jack stands using the Bogert jack pads? This is what we have, but if you look at my picture it looks a little scary and unaligned.
Thanks,

Yup, posted here.

http://www.337skymaster.com/messages...9&d=1503100618