CHT Probe

[J.T.Grant]

Dear Sir,
IO-360A on the 336. The Cylinders are the same though. I agree with matching the probe to the gauge, BUT, it is a lot easier and cheaper to just calibrate the system as a whole once the probe is replaced. Not a bad idea anyway, who knows when or if it was last done.
Regards,
James

[Mark Hislop]

Contact Paul Malkasian at http://www.fuelsenders.com/ . He might be able to repair yours, or tell you where to find one. He is extremely knowledgeable.

[J.T.Grant]

Dear Sirs,
thanks to all for your help. Problem solved. Good CHT readings again.
One day all the old gauges will come out and something new and shiny will go in their place.
Until then, what has been good for the last 47 years should continue to do the job.
Thanks again.
James