|
|
|||||||
| Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
06-02-12, 10:08 PM
|
||||
|
||||
|
Thanks for the reply's
The actuator will be rebuilt with the new bearings. I know that there is some play in the #14 rod end bearing and that part is about $80. I have not had much luck on the #12 packing. Is that just an o-ring? I guess I will find out when we open it up.
__________________
Herb R Harney 1968 337C Flying the same Skymaster for 47 years 
|
Threaded Mode