|
|
|||||||
| Register | FAQ | Members List | Calendar | Today's Posts | Search |
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
There are some AD's for aircraft but I am not aware of any for the Skymaster. Typically the service manual suggests when engine is overhauled the hoses should be changed. Check the service manual.
Hoses are available with or without fire sleeve. Your mechanic should have sources and can buy the fire sleeve bulk to install on the hoses purchased.
__________________
Herb R Harney 1968 337C Flying the same Skymaster for 47 years 
|
|
#2
11-22-13, 12:26 PM
|
|||
|
|||
|
hoses
I use Precision Hose Technologies (PHT), and have been very happy with them. I have also been happy with my Aviall hoses - both good sources.
For PHT, I just send them (with the a&p's help) hose length, and connection fitting sizes on both ends - they fan firesleeve, or not, as you desire. I firesleeve most of mine. I have used PHT for all engine hoses, and in both compartments, as well as hydrualic system hoses. Good luck, Robert
|
|
#3
11-24-13, 11:12 PM
|
|||
|
|||
Teflon hoses
I can do your teflon hoses in various colors
all with tso and certs Colors: Marron Brown Med Blue all with s/s fittings I will be doing a black firesleeve next ( slip ) on type with teflon hoses underneth for a stc holder that requires black hoses with hose black baffles and seals P.S. I also ave all the original patterns for the 336-337-P337 and Riley Rocket 337 baffle seals. baffle seal colors : Champion red ( Riley) Med Blue Black Dark Blue Scat orange regards Guy Ginbey Gee-Bee n77gb@msn.com
|
Hybrid Mode
