Factory Reman

[hharney]

The factory re-man's (like yours) are already run in the test cell for an hour at least. This is really a great advantage. Mine came out of the gate with all vitals stable on the maiden test flight.

I like to keep a close eye on CHT's (JPI 6 point) and put some cruise time for the first 5 or so hours. Nice 1 to 1.5 hour legs while varying RPM's every 30 minutes. Keep the CHT's hot but not close to red line. 325 to 350 max and at cruise 300 to 325.

Attached is a nice write up that a good friend did. He has an late model G riley conv