|
|
|||||||
| Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#16
02-23-19, 12:12 AM
|
|||
|
|||
|
That sounds like a very good option. When you fit your wires mark a line on the wire for alignment of the terminal. This is important on the larger wires. Send pictures.
I just added a few pictures for you. This is the type of crimper you want to use. I also included a crimped connector to show what the finished crimp should look like. Dave Last edited by DrDave : 02-24-19 at 01:32 AM. 
|
Threaded Mode