Upper wing panel removal

[N337RT]

Easy out should be the last resort. I usually have 99% luck using my river gun and this: (mine is home made, but you can order or make something similar)

Shake N Break Air Impact Screw Remover https://www.amazon.com/dp/B000BHJ7JM...M3EWGJ2KNCF0FB

The problem with this is you need to know how to do it. If you have too much pressure or go too hard you will damage something. I use my rivet gun, which has a very nice variable trigger but same results can be had with lowering air pressure.