Quote:
Originally Posted by Joes
I get it, the trailing of the water concept was from a conversation with Uavionix tech support. My personal concept on this was to use the tubing with a tee at midway length and silicone applied where the wires come in to the tube. Place a tube on the tee with a down turn at the top. Hope this helps, wasn't happy to have to replace after 2 years. Joe
|
That sounds like the best we can do for now!
I like the thinking.
If we keep our rudder cap drains unclogged it will never be an issue.
05-27-23, 04:35 PM
Threaded Mode