Need a name/PN

[RandyArizona]

The recepticals for the camlocks on the access bay panels are found here:

https://catalog.howmetfasteners.com/...ulated/26r16-1

https://www.clarendonsf.com/products...ers/26r16-1fgv

https://www.boeingdistribution.com/p...6R16-1/26R16-1

I bought some a few years ago, and can't remember exactly who I bought them from.
They have the same p/n as the cessna parts manual 26R16-1, and I would not/did not hesitate to install them on my aircraft.
the camlock fasteners are different, and can be found at Aircraft spruce:
27S3-3
27S3-5
Depth / length are the deciding factor.
As far as the gasket, if you are looking for a quick, non expensive, water proof seal.............
Go to your favorite pool store, and in the "aviation dept", find a tube of Pool and Spa lube. I use a finger and spread down into the panel spaces, a fine film on the gasket, and around the camlocks themselves. It is sticky, but cleans up quickly with a rag in mineral spirits. I have never had a water issue on mine.
Regards,
Randy

OH, also.... Hi Capt Erwin. If you get down Tucson way, give me a shout.

[Rick Erwin]

It's great to hear from you Randy! I'd love to drop in and see you sometime.

Rick

[n86121]

I think I got a lot of true milspec stainless hardware from

https://www.milspecfasteners.com

If I DO get shot down, at least the wreckage will look really cool.