|
|
|||||||
| Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#7
02-16-04, 11:46 PM
|
|||
|
|||
|
Brake line clamps
John, We use JB Weld between the clamp (clip) and the gear strut. Be sure to clean off all paint and rust. Put the JB Weld on both surfaces and clamp to the "clip". After it dries the exsess can be snaded off. I would not recommend using tie- wraps because of the possibility of catching on something as the gear retracts. If you need I have new MLG brake line clips (P/N 1441001-1) cheap.
Don Nieser Commodore Aerospace Corp 6221 Commodore Lane Oklahoma City OK 73162 405-722-4079 phone and FAX 405-503-4686 cell nieser.02.337parts@juno.com 
|
Threaded Mode