|
|
|||||||
| Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
05-31-04, 02:15 PM
|
|||
|
|||
|
Rick:
You have to do a retraction. Each engine sits a little differently. On the Bogert drain, the STC calls for a minimum of 3/8" clearance. I had about 3/4". I just waited until my annual, when I had to jack up the aircraft and do the retractions anyway. Mark
__________________
Mark Hislop N37E 
|
Threaded Mode