Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Unread 03-15-05, 06:37 PM
KyleTownsend KyleTownsend is offline
Member
 
Join Date: Feb 2004
Location: TN
Posts: 135
KyleTownsend is an unknown quantity at this point
I have had the same experience.

I find that oil consumption is pretty stable at 5 3/4 qt on the rear engine and 6 qt on the front engine. Above this, the oil is quickly thrown out.

CPA has a tech-note on this. They recommend reducing the amount of oil until consumption stabilizes and using that point as your reference. Obviously, when doing this, you should keep a close eye on oil temps to make sure they do not rise. If the temps are stable, then you still have plenty of oil.

CPA indicates that, in their experience, the absolute level indicated by the dipstick is fairly inaccurate, and that the measure should be used as a relative reference.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 09:39 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.