|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
Hplx
I had purchased one from eBay last week. It is due this week. So the short answer is maybe....I will let you know. Thanks
|
#2
|
|||
|
|||
I emailed the software. Did you receive it?
|
#3
|
|||
|
|||
Software
I did not see an email from you. Please confirm the email address.
|
#4
|
|||
|
|||
I will resend this evening
|
#5
|
|||
|
|||
I resent. Did you receive the email?
|
#6
|
|||
|
|||
Gemcom.exe
I did not get it. If you are sending as gemcom.exe lots of email systems will stop that. If you have a chance call me. 917-648-3839
|
#7
|
|||
|
|||
Success!
Thanks to a little field engineering, and some luck I now have a working HPLX 200 palm computer, with a working copy of GEMCOM on a compact flash card. I was able to get it formatted so it can be read in both my windows 10 computer and the HPLX for the interface to the GEM1200. Clearly this is not a modern solution, but the data is there and with a little experimenting I found the spot where I can hold the computer to get the interface to work. There is a reason that IRa interfaces did not catch on, they are very temperamental.
In any case I was able to unload data and graph it on my computer. showed some interesting results, confirmed what I suspect is a bad wire or fouled plug in Cyl1 rear engine, I am posting screen shots of CHT, EGT for both front and rear from my last flight, would love some feedback from the group. Thanks in advance. You will notice a decline in temps and then a rise and decline towards the end of the flight. I executed a go-around as it was a new field, short runway so I did a fly over to check it out. |