|
Thank you for your time. Nope, oil is getting hot. I did notice it too on the top of the filler neck. A bit of rust was begining to form on the filler as well. We removed it and cleaned it up a bit. It's an old engine just about ready for a rebuild. The only thing that struck me as funny is that the front gets no such build up, but the rear does. Thanks again for the help.
P.S. The two books you recommeded to me (Mag and cylinder engineering by sky ranch) was a great read. A lot of information that scared me, but made me richer in knowledge. Thanks
|
Hybrid Mode
